Do You Need a Plumber or a Gas Fitter in NSW?

Plumbing Tips

TL;DR

  • In NSW, plumbing and gas fitting are separate licence categories. A plumbing licence does not automatically cover gas work, and a gas fitting licence does not cover plumbing.
  • Some tradespeople hold both. That matters most on jobs that involve water and gas, like a gas hot water system install, where both licences are legally required.
  • You can verify any tradesperson’s licence categories for free on the Service NSW website before they start work.
  • Hiring someone with both licences means one visit, one point of contact, and no coordination headaches between two separate trades.

Two licences, not one

Most Sydney homeowners assume that if someone is a licensed plumber, they can do gas work too. It’s a reasonable assumption, but it’s wrong.

NSW law requires a licence or certificate for all plumbing, draining, and gas fitting work, regardless of cost or scale. But those are separate categories. You need to be licensed in every category you intend to work in.

In practice, that means a plumber who hasn’t completed additional gas fitting qualifications cannot legally touch your gas cooktop connection, your gas hot water system’s gas line, or a leaking gas fitting. Even if they’ve been a plumber for 30 years.

The reverse is also true. A gas fitter who only holds a gas fitting licence can’t do plumbing work: no water pipes, no drainage, no taps.

What each licence actually covers

Here’s the split in plain terms:

A plumbing licence covers

  • Water supply pipes and connections
  • Drainage and sewer lines
  • Taps, mixers, toilets, and fixtures
  • Hot water system water connections (but not the gas side)
  • Stormwater drainage
  • Backflow prevention

A gas fitting licence covers

  • Gas pipe installation, extension, and repair
  • Connecting gas appliances (cooktops, ovens, heaters, BBQs)
  • Gas hot water system gas connections
  • Gas leak detection and repair
  • Flue installation and maintenance
  • Pressure testing gas lines
  • Issuing gas compliance certificates

The overlap happens at the appliance. A gas hot water system needs water pipes connected (plumbing) and a gas line connected (gas fitting). Both licences are required for that one job.

The jobs where it matters most

For plenty of common household work, you only need a plumber. Fixing a leaking tap, clearing a blocked drain, replacing a toilet cistern, repairing a burst water pipe: all plumbing, no gas involved.

Some jobs are purely gas fitting. Connecting a new gas cooktop to an existing bayonet point, for instance, or installing a gas heater flue. A licensed gas fitter handles those without needing a plumbing licence.

But a surprising number of everyday jobs cross the line:

  • Gas hot water system install or changeover. Water connections are plumbing. The gas line, testing, and compliance certificate are gas fitting.
  • Kitchen renovation with a gas cooktop and new sink. The sink and dishwasher connections are plumbing. The cooktop gas connection is gas fitting.
  • Bathroom renovation where the hot water system is gas. Moving or replacing fixtures is plumbing. Any changes to the gas hot water feed are gas fitting.
  • Gas leak near a water heater. Finding and fixing the gas leak requires a gas fitter. If the water connections also need attention, you need a plumber too.

If you hire a plumber who doesn’t hold a gas fitting endorsement for one of these jobs, they’ll either need to call in a second tradesperson for the gas side, or they’ll be working outside their licence. Neither is ideal.

How to check before you book

You can verify any tradesperson’s licence through the Service NSW online tool. You’ll need their name, licence number, or business name. The search will show you the licence categories they hold, whether the licence is current, and any conditions or disciplinary history.

A few practical tips:

  • Ask for the licence number upfront. A licensed tradesperson should provide it without hesitation. It’s usually on their website, invoice, or business card.
  • Check the categories listed, not just the status. A licence marked “current” for plumbing doesn’t mean it includes gas fitting. Look for the gas fitting endorsement specifically.
  • If the job involves gas, ask directly: “Do you hold a gas fitting licence?” Not “Are you a plumber?” The answer to the second question doesn’t answer the first.

For reference, our NSW licence number is 488187C, and it covers both plumbing and gas fitting. You’re welcome to look it up before you call.

What happens when the wrong person does gas work

This isn’t a technicality. Gas work done by someone without a gas fitting licence creates real problems:

  • Safety. Gas leaks, carbon monoxide exposure, and fire risk. A water pipe failure floods a room. A gas fitting failure can be life-threatening.
  • Insurance. If uncertified gas work causes damage and your insurer finds out the work wasn’t done by a licensed gas fitter, the claim may be declined.
  • No compliance certificate. After any gas installation, alteration, or repair connected to the network, a licensed gas fitter must issue a certificate of compliance. Without one, there’s no record the work was tested to Australian Standard AS/NZS 5601. That becomes a problem when you sell the property, too.
  • Warranty. Appliance manufacturers typically require installation by a licensed gas fitter. Skip that step, and the warranty may not apply.

If you want to understand gas compliance certificates in more detail, our post on what gas fitting work looks like walks through the full process from inspection to sign-off.

Why one tradesperson with both licences is simpler

Coordinating two separate trades for a single job adds time, cost, and scheduling friction. The plumber finishes the water side, then you wait for the gas fitter to show up, test, and certify. If something doesn’t line up, you’re making more calls.

A tradesperson who holds both a plumbing licence and a gas fitting licence handles the entire job in one visit. They connect the water, connect the gas, pressure test, commission the appliance, and issue the compliance certificate before they leave.

That’s how we work. Every plumber on our team is also a licensed gas fitter. So when we install a gas hot water system, run a new gas line to a kitchen, or swap out a gas heater, the whole job is covered under one licence holder, one quote, and one warranty.

The one thing homeowners can do themselves with gas

Almost nothing. The only gas-related task a homeowner can legally do in NSW is connect a portable appliance to an existing bayonet fitting. That means plugging a portable gas heater into a wall bayonet point, or connecting a freestanding BBQ to an existing gas outlet.

Everything else, including anything that involves opening a gas line, altering pipework, or connecting a fixed appliance, must be done by a licensed gas fitter. No exceptions, regardless of how small the job looks.

For a broader look at gas safety rules and what to do if you smell gas, see our guide on gas safety at home.

A quick reference: which licence covers which job

Job Plumbing licence Gas fitting licence
Leaking tap repair Yes No
Blocked drain Yes No
Burst pipe repair Yes No
Toilet replacement Yes No
Gas cooktop connection No Yes
Gas heater install No Yes
Gas leak repair No Yes
Gas hot water system install Yes Yes
Kitchen reno with gas cooktop Yes Yes
Gas line extension No Yes

The short version

Before you book anyone for a job that involves gas, check that they hold a gas fitting licence, not just a plumbing licence. The two are separate in NSW, and the distinction matters for your safety, your insurance, and your compliance paperwork.

If your job involves both water and gas, hiring a tradesperson who holds both licences saves you a second booking, a second quote, and the risk of miscommunication between two trades.

Need gas fitting or plumbing work in Sydney? See what our gas fitting service covers, or call us and we’ll give you a straight answer on what the job needs.

GOT A PROBLEM? WE'VE GOT A PLUMBER.

Give us a call or book online. We're across the whole Sydney Region, 7 days a week – ready when you need us.