TL;DR
- A gas fitter’s inspection covers pipework, appliances, flexible connectors, ventilation, flue condition, and pressure testing. Preparation on your end helps the visit run faster and more accurately.
- Know where your gas meter is and confirm the shut-off valve is accessible before they arrive.
- Clear access to every gas appliance in the home: cooktop, oven, heater, hot water system, and any outdoor BBQ point.
- Write down anything unusual you’ve noticed — smells, flame colour changes, appliance behaviour — and tell the fitter upfront.
- Check the fitter’s NSW licence before they start. You can do this in under a minute at the NSW Fair Trading register.
- After the job, you’re entitled to a compliance certificate. Keep it. You’ll need it for insurance, property sales, and future work.
Why preparation actually matters here
Most homeowners think of a gas inspection the same way they think of a pest inspection: someone arrives, does their thing, and you stay out of the way. Gas is a bit different. The fitter needs to move through every part of your home that has a gas connection — sometimes that’s five or six separate appliances across multiple rooms and outdoors. If any of those spots are blocked, the visit takes longer, or a problem gets missed entirely.
A bit of preparation beforehand saves time and means the fitter can do a thorough job rather than a partial one. It also helps you get more out of the conversation — because the questions you ask and the details you share upfront can change what they look for.
Step 1: Locate your gas meter and confirm the shut-off is accessible
The gas fitter will almost certainly need to access the meter during the inspection. They’ll use it to isolate the system for pressure testing, and they’ll check the regulator and meter connections as part of the process.
Before they arrive, find the meter. In most Sydney houses it’s on an external wall near the front boundary or on the side of the building. In apartments and units it’s usually in a meter cupboard in the car park, basement, or common corridor. If you’re in a unit and you’ve never found your individual gas meter, now is the time — your strata manager can point you to the right location if you’re unsure.
Check that the area around the meter is clear. Move any bins, garden equipment, or stored items that might be blocking access. The shut-off valve at the meter needs to be reachable without the fitter having to shift things around on the day.
Step 2: Clear access to every gas appliance in the home
The inspection covers every connected gas appliance, not just the one you’re worried about. That typically means the cooktop, oven (if gas), space heater or ducted gas heating, hot water system, and any outdoor gas points or BBQ connections.
Go through the house before the visit and make sure each appliance is physically accessible:
- Kitchen: Clear the bench around the cooktop. Move anything stored in the oven if the fitter needs to check the burner assembly or connections at the back.
- Laundry or utility room: Pull the hot water system away from the wall slightly if it’s been pushed back against cabinetry, or at least confirm there’s a clear path to the flue connection and the flexible connector at the back.
- Living areas: If you have a gas wall heater or freestanding gas heater, make sure there’s nothing stacked in front of it. The fitter needs to check the flue outlet and the ventilation clearances around the appliance.
- Outdoors: Clear the area around any outdoor gas bayonet points, BBQ connections, or the hot water system if it’s externally mounted.
Flexible gas connectors — the corrugated stainless hoses that connect appliances to the gas supply — are one of the things the fitter will specifically check. If a connector is behind a drawer or crammed against cabinetry, they may not be able to inspect it properly. Pull appliances out from the wall where you can do so safely.
Step 3: Write down anything you’ve noticed before the visit
The fitter will run their own tests, but your observations are genuinely useful. You live in the home and you’ve noticed things they won’t see in a one-off visit. Before the inspection, take ten minutes and write down:
- Any smell of gas — even faint or intermittent. Note where in the house and when it tends to occur.
- Flame colour. A healthy gas flame burns blue. If any burner on your cooktop or heater has been showing yellow or orange flames, write that down and note which appliance.
- Ignition problems. Appliances that are slow to light, won’t light at all, or that the pilot has gone out on.
- Changes in hot water performance — especially if the system has started taking longer to heat up, or if the temperature fluctuates more than it used to.
- Unusual sounds near the meter, pipework, or any appliance: hissing, clicking, or anything out of the ordinary.
- A gas bill that’s gone up without any obvious change in how you use gas.
Share this list when the fitter arrives. It tells them where to focus first and can help them identify a fault faster than pressure testing alone would reveal.
Step 4: Know the age and service history of your appliances
If you have the original manuals or installation paperwork for your gas appliances, put them somewhere accessible before the visit. The fitter may want to check the model number, rated gas pressure, or the installation date — particularly for hot water systems and space heaters, which have service intervals that vary by brand and model.
If you don’t have paperwork, the appliance data plate (usually on the inside of the door, on the back panel, or on the unit casing) will have the model number and serial number. The serial number can often be used to determine the manufacture date, which tells the fitter how old the unit actually is.
Flexible gas connectors are worth a specific mention here. NSW guidelines expect replacement every ten years, or earlier if cracking or corrosion is visible. If you know your appliances haven’t been touched since you moved in, mention that — the fitter will check the connectors as part of the inspection, but knowing the history helps them decide whether replacement is needed or just monitoring.
Step 5: Make sure every appliance is turned off before the fitter arrives
Turn off all gas appliances before the inspection starts. That means the cooktop, oven, heater, and any gas hot water system that has a pilot or ignition running. You don’t need to turn off the gas at the meter — the fitter will manage that themselves when they’re ready to pressure test.
Appliances running during the inspection can affect pressure readings and make it harder to detect small leaks accurately. Turning them off beforehand is a simple step that makes the pressure test more reliable.
If you have a gas heater with a standing pilot light that you’re not sure how to turn off, just let the fitter know when they arrive. They’ll deal with it.
Step 6: Verify the fitter’s NSW licence before work starts
Only a licensed gas fitter can legally inspect, test, and certify a gas installation in New South Wales. A general plumber, handyman, or appliance technician without a gas fitting licence cannot issue a valid compliance certificate — and any work they do on the gas system is not legally authorised.
You can check any gas fitter’s NSW licence in about 60 seconds using the NSW Fair Trading public register at fairtrading.nsw.gov.au. Search by the licence number or the business name. Confirm the licence is current and includes gas fitting work — not just general plumbing.
A legitimate fitter won’t have any issue with you checking. If they do, that tells you something.
For more on what each licence class covers and why it matters for gas work specifically, see our guide on whether you need a plumber or a gas fitter in NSW.
Step 7: Prepare your questions in advance
The inspection visit is the right moment to ask about anything you’ve been uncertain about. Once the fitter has assessed the system, they’re in the best position to give you an honest answer. Some useful questions to have ready:
- Are any of my flexible connectors approaching the end of their service life?
- Is the ventilation around my gas heater or hot water system adequate?
- Are there any signs of corrosion on the pipework that I should monitor?
- Is my current gas line sized correctly if I wanted to add another appliance?
- Are there any issues I should get repaired now versus things that can wait?
You’re paying for the visit. Use it. A good gas fitter will walk you through what they found in plain language, not just hand you a certificate and leave.
What the fitter actually does during the inspection
Understanding what the inspection covers helps you prepare for it. A standard residential gas inspection in Sydney typically involves:
- Visual assessment of all exposed pipework — checking for corrosion, physical damage, unsupported runs, and deteriorating joints or fittings.
- Pressure testing — the fitter isolates the gas installation and pressurises the pipework using calibrated equipment to confirm the system holds regulated pressure for a set duration. If there’s a leak, it shows up here.
- Appliance checks — burner performance, flame colour, ignition and shutdown, gas pressure at the appliance, and the condition of flexible connectors.
- Ventilation and flue inspection — confirming that combustion gases are safely venting to outside and that clearances around appliances meet the requirements of AS/NZS 5601.1.
- Meter and regulator check — inspecting regulator outlet pressure, meter connections, and the condition and accessibility of the meter assembly.
A thorough inspection of a standard Sydney home with three to five gas appliances typically takes two to three hours. If access is difficult or the system is older, it may take longer.
To understand what happens step by step once the fitter is on site, see our detailed walkthrough of what gas fitting work looks like in a Sydney home.
What you get at the end: the compliance certificate
After completing any gas fitting work — including repair work identified during an inspection — the fitter must provide a Certificate of Compliance (for networked gas) or a Certificate of Inspection (for LPG/bottled gas) within five business days. This is a legal requirement under NSW law, not an optional extra.
Keep this certificate. You’ll need it if you sell the property, if an insurer asks for evidence of compliant gas work, or if a future gas fitter needs to understand what’s been done to the system. If the fitter doesn’t offer it, ask for it directly before they leave.
Note that a routine safety inspection where no work is performed doesn’t automatically trigger a certificate — but any repair or modification discovered and fixed during the visit does. Ask the fitter to clarify what documentation you’ll receive before they start.
A quick pre-visit checklist
- Gas meter located and area cleared
- Access cleared to every gas appliance (cooktop, oven, heater, hot water, outdoor points)
- Appliances pulled slightly from walls where possible so flexible connectors are visible
- All gas appliances turned off
- Notes written on anything unusual: smells, flame colour, ignition issues, bill changes
- Appliance manuals or model numbers noted
- Questions written down and ready to ask
- Fitter’s NSW licence checked at Fair Trading before they arrive
Ready to book a gas inspection?
If it’s been a while since your gas system was looked at — or you’ve noticed something that doesn’t seem right — get it checked properly. Me or one of my guys can inspect your gas system, identify any issues, and give you a clear answer on what needs attention and what can wait. All work is done by licensed gas fitters, and you’ll get the compliance documentation at the end. See our services or call us to book.