TL;DR
- A building inspection arranged by a buyer will find plumbing faults. Running your own checks first means you fix them on your terms, not theirs.
- The inspections that matter most before listing: water meter leak test, hot water system condition, drainage and sewer lines, flexible hoses, visible pipe condition, gas compliance, and waterproofing in wet areas.
- Older Sydney homes — anything built before the mid-1980s — carry more risk across all of these categories and benefit most from a pre-listing plumber visit.
- A licensed plumber can walk through the property before it goes on the market, identify what needs fixing, and give you a written report you can include in the contract file.
Why sellers benefit from running plumbing checks first
Most Sydney vendors think about paint, gardens, and styling before a sale. Plumbing rarely makes the list until a buyer’s building inspector flags something and the negotiation turns awkward.
A buyer’s inspector finding a leaking hot water system, a slow drain, or signs of a concealed leak gives the buyer leverage. You either drop the price, agree to fix it before settlement, or watch the deal wobble. None of those outcomes are ideal when you had months to sort it quietly.
Running your own plumbing checks before listing puts you back in control. You know what’s there, you can fix what matters, and you’re not scrambling to find a plumber the week before settlement.
Check 1: The water meter test — do this first, before anything else
Turn off every tap, appliance, and water-using fixture in the house. Go to the water meter at the front boundary and watch the dial for two minutes. If it moves, water is leaving the system somewhere it shouldn’t be.
This test costs nothing and takes five minutes. It won’t tell you where the leak is, but it tells you whether one exists. A buyer’s plumber will run exactly this test during their inspection. Better to know the answer before they do.
If the dial moves, a licensed plumber can trace the source — whether it’s a concealed pipe behind a wall, a slow drip under a slab, or something simpler like a running toilet. For more on what a moving meter actually means, see our guide on water meter moving with all taps off.
Check 2: Hot water system age and condition
The hot water system is one of the first things a buyer’s inspector notes. Age, manufacture date, condition of the pressure relief valve, signs of rust or corrosion around the base — all of it goes in the report.
Find the compliance plate on your unit and note the manufacture date. Electric storage systems typically last 8 to 12 years. Gas storage systems run 10 to 15 years. If your unit is approaching or past those ranges, a buyer’s inspector will flag it, and it becomes a negotiating point regardless of whether it’s still working on the day.
Have a licensed plumber check the relief valve, anode condition (where accessible), and overall performance before listing. If the system is genuinely near end of life, replacing it before the sale is often cleaner than discounting. If it has years left in it, a service record helps your case.
Our hot water system service covers assessment, repair, and replacement across Sydney.
Check 3: Drainage — what you can see and what you can’t
Run every drain in the house. Kitchen sink, bathroom basins, shower, bath, laundry tub. Watch how fast each one clears. A drain that takes 30 seconds to empty is telling you something. A drain that gurgles after another fixture is used nearby is telling you something more serious.
Slow or gurgling drains are easy for a buyer’s inspector to spot and easy for them to use. They’re also usually straightforward to fix before listing — a high-pressure jet clear costs far less than a price reduction.
The drains you can’t check yourself are the underground sewer and stormwater lines. For older Sydney homes — particularly those with terracotta or clay sewer pipes and established trees nearby — a CCTV drain inspection is worth doing before you list. It shows the condition of the underground pipes and confirms whether there are root intrusions, cracks, or collapsed sections that a buyer’s plumber would find anyway.
A CCTV report also gives you something concrete to put in front of buyers. Rather than leaving them to wonder what’s underground, you have footage and a written assessment. That’s a credibility asset, not a liability — assuming you’ve dealt with anything serious before it goes on the market.
Check 4: Flexible hoses under sinks and behind toilets
Flexible braided hoses are the highest-risk item in most Sydney homes, and most sellers have never looked at theirs. They sit under kitchen sinks, bathroom vanities, and behind toilets — out of sight, rarely checked, and capable of failing without warning.
Open every cabinet under a sink and look at the hoses connecting the taps to the water supply. Look for bulging, corrosion at the fittings, cracking in the outer braid, or any sign of previous moisture in the cabinet. A hose that’s more than 10 years old is a risk worth addressing before you sell.
A buyer’s inspector opening those cabinets and finding corroded hoses or water staining in the cabinetry will put it in the report. It’s a straightforward fix before listing, and it removes a line item from the negotiation entirely. Our post on plumbing components likely to fail after 30 years covers flexible hoses and what to look for in more detail.
Check 5: Taps, toilets, and visible fixtures
Walk through every wet area and test everything. Turn on every tap — hot and cold — and check for drips, leaks at the base, or poor water pressure. Flush every toilet and watch whether it runs after the cistern refills. Check the toilet base for any staining or soft flooring around the pan, which can point to a failed pan collar seal.
Dripping taps and running toilets are minor in isolation, but a buyer’s inspector listing three or four of them creates a picture of a property that hasn’t been maintained. That narrative costs more than the repairs.
Any tap that drips or runs after being turned off, and any toilet that keeps running after flushing, should be fixed before the first open home. These are fast, low-cost repairs. See our leaking tap repair service and toilet repair service if you need them sorted quickly.
Check 6: Water pressure across the house
Run the shower and a basin tap at the same time and note whether pressure drops noticeably. Low pressure across the whole house can point to corroded galvanised supply pipes — common in Sydney homes built before the 1970s — or a partially closed isolation valve somewhere in the supply line.
Galvanised pipes corrode from the inside, narrowing the bore over decades until flow is noticeably restricted. A buyer’s plumber who tests pressure and finds it below acceptable levels will ask questions. If the pipes are galvanised and corroding, that’s a significant finding — and one that’s better to know about and address before listing than to have surfaced during a buyer’s due diligence.
Check 7: Wet area waterproofing and signs of concealed leaks
Look carefully at the grout and silicone in every shower. Cracked grout, deteriorating silicone at the base of the screen, and tiles that sound hollow when tapped can all indicate that water has been getting behind the tiles. Failed waterproofing is one of the most expensive things a buyer’s inspector can find, and it’s also one of the most common in Sydney homes.
Check the ceiling of any room below a bathroom. Staining, bubbling paint, or soft spots in the plasterboard are signs that water has been moving through the floor structure. Check under bathroom vanity cabinets for moisture, swelling, or staining around pipe connections.
If you find signs of moisture but can’t identify a clear source, a licensed plumber with a moisture meter can confirm whether there’s an active leak and where it’s coming from. Dealing with a concealed leak before listing is far better than having it discovered during a buyer’s inspection, when the repair timeline is no longer yours to control.
Check 8: Gas compliance (if the property has gas)
If the property has gas appliances — hot water, cooktop, heater — check that each one has a current Certificate of Compliance for any work done in the last few years. A buyer’s solicitor may ask for these documents, and a missing certificate for a gas installation is a legitimate red flag.
Visually check the flexible gas hoses connecting appliances. Look for cracking, corrosion at the fittings, or any hose that’s more than 10 years past its stamped date. A licensed gas fitter can inspect all connections, confirm compliance, and issue the paperwork you need for the contract file.
Gas compliance is not something to leave to chance before a sale. The documentation matters, and a buyer who asks for it and doesn’t receive it will want answers.
Check 9: External drainage and stormwater
Walk the perimeter of the property after a rain event, or run a hose along the roofline for a few minutes and watch where the water goes. Check that downpipes are connected and discharging away from the foundations. Look at visible stormwater grates and pits — are they clear, and do they drain?
Pooling water near the house, overflowing stormwater pits, or downpipes that discharge directly against the footings are all things a building inspector will note. They’re also things that can be addressed before listing with relatively straightforward drainage work.
What a pre-listing plumber visit actually covers
A licensed plumber walking through your property before it goes on the market will cover all of the above in a single visit. They’ll run the meter test, check the hot water system, test every tap and toilet, inspect the flexible hoses, assess visible pipe condition, and look for signs of concealed leaks or drainage problems.
For older properties, or any home where you suspect there might be issues underground, a CCTV drain inspection can be added to the visit. You get footage of the sewer and stormwater lines, a written condition report, and a clear picture of what needs attention before you list.
That report also gives your agent something to work with. A vendor who can show a recent plumbing inspection and a list of completed repairs is in a stronger position than one who can’t answer basic questions about the property’s condition.
A quick pre-listing plumbing checklist
- Water meter test: dial stationary with all taps off?
- Hot water system: age noted, relief valve checked, no rust or corrosion at the base?
- All drains: running freely, no gurgling, no slow clearance?
- Flexible hoses: no bulging, corrosion, or cracking — and not more than 10 years old?
- Taps: no drips, adequate pressure, no leaks at the base?
- Toilets: flush properly, cistern stops running, no staining around the base?
- Shower grout and silicone: intact, no hollow tiles, no moisture behind the wall?
- Ceilings below bathrooms: no staining, bubbling, or soft spots?
- Gas appliances: Certificates of Compliance on file, flexible hoses in good condition?
- External drainage: downpipes connected and clear, stormwater pits draining?
When to get a plumber in before you list
If the property is more than 20 years old, you’ve had any plumbing issues in the last couple of years, or you simply haven’t had the plumbing looked at in a while, book a licensed plumber before the property goes on the market. It’s a straightforward visit, and the cost is a fraction of what a negotiated price reduction looks like.
Me or one of my guys can walk through the property, run the checks, and give you a written report you can use with confidence. Call us on 1300 225 274 or get in touch online to book a pre-listing plumbing inspection across Sydney.