You’ve decided to sort out a dripping tap yourself, or you’re renovating and want to supply your own tapware to save a bit. Now you’re staring at a wall of fittings at the hardware store, or a hundred browser tabs of online plumbing shops, wondering which one is the right call. The store you buy from matters less than one thing most people never check: whether the part is actually legal for a plumber to install.
TL;DR
- You can buy pipes, fittings, tapware and fixtures without a licence, but installing regulated plumbing work still needs a licensed plumber.
- The single most important check is the WaterMark. Certain products must carry it, or a licensed plumber can’t legally install them.
- Hardware chains suit small repairs and common consumables. Trade plumbing suppliers carry the widest range and technical support. Online stores win on obscure parts and price.
- Manufacturer-direct is best for warranty parts on a specific model of tap, toilet or hot water unit.
- If you’re supplying materials for a plumber to fit, talk to them first so you buy parts they’ll actually install.
First, the rule that decides everything: WaterMark
Before you think about which shop, understand this. The WaterMark Certification Scheme is a mandatory national scheme, and it governs which plumbing products can legally be installed.
Here’s the catch that trips people up. It is legal to sell non-WaterMark certified plumbing and drainage products in Australia, but if the product type is listed on the WaterMark Schedule of Products and isn’t certified, a licensed plumber is not permitted to install it. So you can absolutely buy an uncertified fitting online. It just may be useless once a plumber sees it.
This applies no matter where you shop. Products listed on the Schedule must be WaterMark certified even when purchased via online stores like eBay and Amazon. A bargain tap from an overseas seller is no bargain if it can’t be fitted.
What actually needs it? Any product that comes into contact with drinking water, including fixtures, valves, pipes and fittings, must be approved. The practical move: look for the WaterMark on the product and packaging before you buy, to confirm it’s certified and authorised for installation. The mark should show the WaterMark trademark, a licence number and the product specification.
The four main places to buy, and what each is good for
Hardware chains (Bunnings and similar)
Best for small repairs and everyday consumables. Think plumber’s tape, washer kits, a replacement flexi hose, a common trap, or a plunger. For minor repairs a well-stocked toolkit is invaluable, and many stores offer pre-assembled repair kits that handle most common household issues. Wide reach, easy returns, and you can hold the part in your hand before buying. The trade-off is depth: the exact obscure fitting or a specific brand’s spare part often isn’t on the shelf.
Trade plumbing suppliers
These are the branches plumbers actually use (Reece, Tradelink, and similar). They carry the broadest range across pipe, valves, tapware and hot water, and the counter staff know the products. Trade accounts offer significant advantages for professionals, including pricing and access to commercial-grade lines. Some counters happily serve the public; others lean towards account holders. If you want the correct part first time and someone who can sanity-check your choice, this is usually the smart stop.
Online plumbing stores
Best for range, price, and hunting down parts nobody local stocks. Dedicated Australian online plumbing retailers list spec sheets and warranty details alongside each product, which makes matching a part easier. The downsides are the ones you’d expect from any online purchase: you can’t feel the part, shipping adds time, and returns take longer. Read the specifications carefully, and check for the WaterMark listing on anything that touches drinking water.
Manufacturer direct
Best for model-specific spares and warranty claims. If a mixer cartridge, a toilet flush valve, or a hot water thermostat has failed, going to the maker (or their approved parts channel) usually gets you the exact component and keeps any warranty intact. It’s slower and rarely the cheapest, but for a fiddly brand-specific part it saves the guesswork.
A quick guide: which shop for which job
- A dripping tap washer or a new flexi hose: hardware chain.
- A full bathroom’s worth of tapware and fittings: trade supplier or a reputable online plumbing store.
- An unusual fitting or a discontinued size: online plumbing specialist.
- A spare part for a specific tap, toilet or hot water unit: manufacturer direct.
- Anything for a gas or hot water appliance: talk to your plumber before buying anything.
Buy the part, but know where the line is
Buying materials is one thing. Installing them is another. Pipes, fittings, taps and fixtures can all be purchased without a licence, but installing plumbing work typically requires a licensed plumber to ensure it complies with regulations.
Some jobs are genuinely fine to do yourself: swapping a tap washer, replacing a worn flexi hose on a mains-connected appliance you can isolate, changing a shower head. Plenty are not. Anything involving gas, hot water units, changes to your drainage or water supply pipework, or connections behind the wall should go to a licensed plumber in NSW. It’s not just about skill. Regulated work needs a compliance certificate, and an uncertified or wrongly installed part can void that, or fail an inspection.
Gas is the hard line. Never attempt gas fittings or appliance connections yourself. Buy nothing for a gas job without your gas fitter’s say-so.
If you’re supplying materials for a plumber to fit
This is where a bit of money gets wasted every day. People buy tapware they love, then find the plumber won’t or can’t fit it, either because it’s not WaterMark certified or because it’s the wrong configuration for the space.
Save yourself the headache:
- Ask your plumber what they’re happy to install before you buy. Some prefer to supply the parts so the warranty runs through them.
- Confirm the item is WaterMark certified if it touches drinking water.
- Check sizing and connection type against what’s already in your wall or floor.
- Keep receipts and boxes until the job’s signed off.
At Jasco, when you’d rather we handle it, we work with quality Australian and international brands and can supply and install tapware and tap fittings in the one visit, so the part and the workmanship are both covered.
A note on water filters and specialty fittings
Filters and their fittings are a common DIY buy, and they’re a good example of where supply and install decisions get blurry. If you’re weighing up who fits what, our guide on whether a plumber can install water filters walks through which parts need a licensed hand and which you can manage yourself.
The bottom line
Where you buy comes down to the job: hardware chains for quick repairs, trade suppliers for range and advice, online for hard-to-find parts, and manufacturers for model-specific spares. But the store is the easy part. The thing that actually protects you is checking for the WaterMark on anything that carries water, and knowing which jobs need a licensed plumber rather than a weekend and a good intention.
Not sure whether the part you’ve found is the right one, or whether the job’s one to leave alone? Send us a photo of the fitting and what you’re trying to do. We’ll tell you honestly whether it’s a DIY fix or one for a licensed plumber, and there’s no charge to talk it through.